Surplus Industrial Technology Limited
Surplus Industrial Technology Limited We offer a variety of equipment for heating high-purity fluids and gases, including chemical PFA/PTFE Inline heaters, deionized water heater, PTFE heat exchanger
Add to Cart
Electric Immersion Heaters are most suitable for direct heating of nearly all process liquids and corres- ponding applications.
Excellent chemical resistance is ensured by the use of different immersion tube materials and variable fitting options help you to meet the individual re- quirements of heating installations.
A long life span with optimum reli- ability is assured by using high qual- ity materials thereby ensuring fault- less operation of your system.
Electric Immersion heater is constructed on a modular basis and consists of a tube, a long-life heat- ing cartridge, a terminal casing and the lead.
The Immersion Heater Tube
We can offer you the optimum ma- terial for every application. The heated length (minimum immersion depth) is marked by a ring which is generally two-thirds of the tube length. The tube is not heated above this mark. The heated portion must always be covered with liquid even in the case of high liquid level fluc- tuation.
The Long-Life Heating Cartridge
Long-life heating cartridges are made from ceramic groove bodies with high electrical insulation values and good mechanical strength.
A high temperature resistance heat- ing wire is fitted as a coil in order to achieve the best possible heat radiation from tube to liquid. The cartridges for immersion heaters are available in rated power voltages up to a maximum of 500 volts for one, two and three phase connections.
Flammable Solvent Heating
Products designed to safely heat IPA and low flash-point solvents, meeting the most stringent cleanliness requirements to support next-generation semiconductor node technologies.
Products For Flammable Solvent Heating | ||
PFA Inline Chemical Heater | PTFE Inline Chemical Heater
| Inline Chemical Heater
|
Products For Anodizing | ||
| MOTS SINGLE – BOTTOM, DERATED .
| MOTS TRIPLE – L SHAPED
| 6HS SERIES – TUBULAR
|
| MOTS TRIPLE – DEEP TANK
| MOTS TRIPLE – DEEP TANK Deep tank, metal over the side heater. Three phase. Heats up to 300°F (149°C). Single or three phase. 18000-54000 watts, 208-600 volts. | G (GRID) SERIES COIL
|
| 9HX SERIES Low watt density, 9 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 3000-18000 watts, 208-600 volts. | 6HX SERIES Low watt density, 6 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 2000-12000 watts, 208-600 volts. | 3HXOL SERIES Low watt density, 3 element, bottom heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions . 3000-18000 watts, 208-480 volts.
|
Electrochemical Deposition is a cost-effective process using oxidation and reduction to adhere metal to a surface using electricity. The process is also sometimes referred to as Electro-Plating. Surplus products deliver full power supply output performance, high efficiency, high-speed DC output, connectivity, reliability, and ETL certification.
| Electrochemical Deposition Products(2) | ||
| MOTS TRIPLE – VERTICAL .
| 9HS SERIES – TUBULAR
| V SERIES – VARIPOWER
|
| MOTS SINGLE
| MOTS SINGLE – DAS, PHOSPHATE MOTS Single DAS Phosphate Heater – Top Portable Electric Immersion Heaters: Phosphate, metal over the side heater. Single or three phase. 1000-10000 watts, 120-600 volts. | MOTS TRIPLE – L SHAPED, DERATED
|
We can serve you in the teflon lined welded tank, small teflon lined vessel, mixer PTFE lined vessel and more PTFE teflon lined tank below.
Material used : PTFE, PFA, FEP, ECTFE, PVDF etched or glass backing.
Can store acid or alkali
high temperature resistance
Can custom sizes or even install PFA outlet and PFA inlet
| | |
| | |
| | |