Surplus Industrial Technology Limited
Surplus Industrial Technology Limited We offer a variety of equipment for heating high-purity fluids and gases, including chemical PFA/PTFE Inline heaters, deionized water heater, PTFE heat exchanger
Add to Cart
Usually made of silicon, high efficiency, low-cost, long-life Photovoltaic (PV) solar cells are made by depositing PV material layers on a supporting material. Layering multiple semiconductors to create multijunction cells increases efficiency.
Inline Chemical Heaters are unlike any other heating technology on the mar- ket because of our thin film on PFA electric resistive technology. Our technology, combined with high-purity materials, a quick ramp up time, crevice-free design, and customizable configurations, creates reliable and efficient heater.
Because of the design simplicity and flexibility, we can accommodate a wide range of application needs with only two models – a high temperature version and a low temperature version. These heaters are well-suited as a plug-and-play design for a variety of applications, especially with fluids that need to be heated quickly and at point-of-use.
MAX FLOW
28 LPM / 7 GPM
MAX TEMPERATURE
100 °C / 212 °F ICA 200 °C / 392 °F ICB
MAX PRESSURE
80 PSI / .55 MPa
MATERIALS
PFA element with housing options (PTFE, PFA and PVDF)
POWER
3 kW, 4 kW, or 6 kW combinations single phase or three phase
VOLTAGE OPTIONS
208, 400
Applications
Semiconductor Wet Processes
Sterilization/Cleaning
Solar/Photovoltaic Wafer Cleaning
Safety Features
Liquid level sensor
Ground wire options
Over-temperature thermocouple
Process thermocouple
| Model | PH1 | PH7 |
| Wetted Material | PVDF/PFA | PVDF/PFA |
| Housing Material | Pipe | Pipe |
| Max Temp | 95°C | 95°C |
| Pressure | 60 psi at 95°C | 60 psi at 95°C |
| Power | 1-6 kW | 1-6 kW |
| Accuracy | ± 0.1o C | ± 0.1o C |
| Voltages | 200-600 VAC, 1 and 3-phase | 200-600 VAC, 1 and 3-phase |
| Flow | 0.5-32 gpm (1.9-122 L/min) | 0.5-32 gpm (1.9-122 L/min) |
| Benefits | Variable height | Higher flow, kW |
Other Applications(Other products)
PTFE Tanks
We can serve you in the teflon lined welded tank, small teflon lined vessel, mixer PTFE lined vessel and more PTFE teflon lined tank below.
Material used : PTFE, PFA, FEP, ECTFE, PVDF etched or glass backing.
Can store acid or alkali
high temperature resistance
Can custom sizes or even install PFA outlet and PFA inlet
 | | |
| | |
| | |