Surplus Industrial Technology Limited
Surplus Industrial Technology Limited We offer a variety of equipment for heating high-purity fluids and gases, including chemical PFA/PTFE Inline heaters, deionized water heater, PTFE heat exchanger
Add to Cart
Voltage: 230V 1Phase
Power: 1.5KW
Dimension: 190*190*40MM, can do as your requirements
Material: PTFE+PFA heating wire
Usage: Put on the bottom of the chemical tank to heating up the tank solutions.
Industries
Ultra-High-Purity Solutions
Surplus designs and manufactures thermal solutions and power supplies to meet the most stringent cleanroom,
ultra-high-purity (UHP) processes, and customer requirements of the Semiconductor and Wafer Processing industries.
Wet-Deposition
Flammable Solvent Heating
Chemical Heating
RO/DI Water Heating
Ultra-High-Purity Heating
Heaters For Semiconductor are great for heating fluid baths to a constant temperature. These heaters are ideal for use in the semiconductor, pharmaceutical, and biomedical industries. First of all, these immersion heaters provide clean heat evenly and efficiently. Furthermore, they’re compact and highly customizable. They provide a maximum process work area, and consume a minimal amount of chemicals. Moreover, wetted surfaces feature all-PFA materials, and may be used in tanks made of PVDF, PFA, or quartz. Please contact us with inquiries about other tank materials.
These rugged and durable heaters come in grid, frame, and fence models, with outputs of 1.0 to 30.0 kW. Most importantly, they feature a low watt density (≤ 4 watts/in²) for a fast heating response. Furthermore, these heaters integrate easily into most process tanks. Provide Surplus with your specifications and tank size, and let us build an immersion heater for you.
At the heart of these immersion heaters is the patented PreciseHeater heating coil, with a efficiency of > 99% and a MTBF of more than 10 years. Moreover, a microprocessor-based temperature controller regulates the heater output. Additionally, optional safety features include both platinum and embedded ground wires, a Type-J process thermocouple, and RTD over-temperature and process thermocouples.
Maximum heating temperature of these immersion heaters is 200º C (392º F), with a temperature accuracy of ± 0.1º C (contingent on customer’s facilitation). Grid heaters are typically ¾” high, and frame heaters 1 ½” high. Outputs range from 1.0 to 30.0 kW (dependent on customer voltage), and from 120 VAC to 480 VAC, 1 or 3-ph (dependent on wattage).
| Heater Element | Heating Coil |
|---|---|
| Wetted Surfaces | PFA/PTFE |
| Wattages | 1.0 – 20 kW |
| Voltages | 120 – 480 VAC 1 or 3 phase |
| Sizes (LxW) | 7x5 to 19x14 inch |
| Height | 1-5/8 inch |
| Temperature | 200°C (392°F) |
| Hi-Limit Sensor | Type-J thermocouple |
| Ground Wire | Encapsulated |
| Lead Wire | 15-ft |
Electrochemical Deposition is a cost-effective process using oxidation and reduction to adhere metal to a surface using electricity. The process is also sometimes referred to as Electro-Plating. Surplus products deliver full power supply output performance, high efficiency, high-speed DC output, connectivity, reliability, and ETL certification.
| Electrochemical Deposition Products(2) | ||
| MOTS SINGLE – BOTTOM, DERATED .
| MOTS TRIPLE – L SHAPED
| 6HS SERIES – TUBULAR
|
| MOTS TRIPLE – DEEP TANK
| MOTS TRIPLE – DEEP TANK Deep tank, metal over the side heater. Three phase. Heats up to 300°F (149°C). Single or three phase. 18000-54000 watts, 208-600 volts. | MOTS TRIPLE
|
Products For General Metal Finishing | ||
| MOTS SINGLE
| MOTS SINGLE – DAS, PHOSPHATE
| MOTS TRIPLE – L SHAPED, DERATED
|
| MOTS SINGLE – BOTTOM, DERATED .
| MOTS TRIPLE – L SHAPED
| 6HS SERIES – TUBULAR
|
| 9HX SERIES Low watt density, 9 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 3000-18000 watts, 208-600 volts. | 6HX SERIES Low watt density, 6 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 2000-12000 watts, 208-600 volts. | 3HXOL SERIES Low watt density, 3 element, bottom heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions . 3000-18000 watts, 208-480 volts.
|