Surplus Industrial Technology Limited
Surplus Industrial Technology Limited We offer a variety of equipment for heating high-purity fluids and gases, including chemical PFA/PTFE Inline heaters, deionized water heater, PTFE heat exchanger
Add to Cart
PFA immersion tank heaters are the perfect solution for heating harsh chemicals or DI water to constant temperatures in ultrapure tanks, including PVDF, PFA, and quartz tanks. Their PFA/PTFE wetted surfaces are ideal for use in high-purity applications where chemical compatibility is of utmost importance. PFA immersion tank heater provide high-efficiency heating with superior temperature control and maximum power output in a compact footprint. The heaters are available in various sizes that easily fit new and existing systems common to semiconductor, solar, MEMs, and other technological industries.
| Heater Element | Heating Coil |
|---|---|
| Wetted Surfaces | PFA/PTFE |
| Wattages | 1.0 – 20 kW |
| Voltages | 120 – 480 VAC 1 or 3 phase |
| Sizes (LxW) | 7x5 to 19x14 inch |
| Height | 1-5/8 inch |
| Temperature | 200°C (392°F) |
| Hi-Limit Sensor | Type-J thermocouple |
| Ground Wire | Encapsulated |
| Lead Wire | 15-ft |
| Model | kW | Height | Benefits |
|---|---|---|---|
| Grid | 1-6 kW* | 3/4 in | Low Profile Design |
| Frame | 1-30 kW | 1-1/2 in | Low Profile Design for Higher kW's |
| Fence | 1-10 kW | Variable | Heater on side of tank leaving center of tank open |
Products For Ultra-High-Purity Heating | ||
| Inline Heater
| PFA Inline Heater
| Inline Chemical Heater
|
Flammable Solvent Heating
Products designed to safely heat IPA and low flash-point solvents, meeting the most stringent cleanliness requirements to support next-generation semiconductor node technologies.
Products For Flammable Solvent Heating | ||
PFA Inline Chemical Heater | PTFE Inline Chemical Heater
| Inline Chemical Heater
|
Electrochemical Deposition is a cost-effective process using oxidation and reduction to adhere metal to a surface using electricity. The process is also sometimes referred to as Electro-Plating. Surplus products deliver full power supply output performance, high efficiency, high-speed DC output, connectivity, reliability, and ETL certification.
| Electrochemical Deposition Products(2) | ||
| MOTS TRIPLE – VERTICAL .
| 9HS SERIES – TUBULAR
| V SERIES – VARIPOWER
|
| MOTS SINGLE
| MOTS SINGLE – DAS, PHOSPHATE MOTS Single DAS Phosphate Heater – Top Portable Electric Immersion Heaters: Phosphate, metal over the side heater. Single or three phase. 1000-10000 watts, 120-600 volts. | MOTS TRIPLE – L SHAPED, DERATED
|
Products For Anodizing | ||
| MOTS SINGLE – BOTTOM, DERATED .
| MOTS TRIPLE – L SHAPED
| 6HS SERIES – TUBULAR
|
| MOTS TRIPLE – DEEP TANK
| MOTS TRIPLE – DEEP TANK Deep tank, metal over the side heater. Three phase. Heats up to 300°F (149°C). Single or three phase. 18000-54000 watts, 208-600 volts. | G (GRID) SERIES COIL
|
| 9HX SERIES Low watt density, 9 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 3000-18000 watts, 208-600 volts. | 6HX SERIES Low watt density, 6 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 2000-12000 watts, 208-600 volts. | 3HXOL SERIES Low watt density, 3 element, bottom heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions . 3000-18000 watts, 208-480 volts.
|
| HXF SERIES Low-watt density, spiral heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. 500-6000 watts, 120-600 Volts. | HX SERIES Low watt density, spiral. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions . Single phase. 500-9000 watts, 120-600 volts. | 3HX SERIES
|